Radio Removal Installation Guide BMW Mini 2001-2006

The Hatch is mini the classical form. The compact three-door model is available the base for all the other car body variations of the British small car brand and with five petrol engines from 75 HP. The strongest model is John Cooper Works with 211 HP who sprints in 6.5 seconds on 100 km/h. Moreover, there are three diesel variations with 90, 112 and 143 HP. The models One D and Cooper D which offer a norm consumption of 3.8 litres 100 kilometres are most sparing.

In the BMW Mini in 2001-2007 it is no problem. One needs of course a suitable adaptor as well as a BMW car stereo fitting kit for the dashboard.

USB-Sticks or MP3 player can also connect one with AUX? But with the new radio all the other modern springs can be used.

  • Installation time: About 15 minutes a workshop is not required!
  • Removal tools: Torx screwdriver, screwdriver!

 

miniradio

  • In the side footbridges of the middle console two screws are in each case right and left! Glove compartment open with it one to both screws in addition comes!

 

mini2002radio5

  • Under the drink mounting and in the middle section after the speed-shift they are also two screws must be solved with it one can remove the side plates of the central console.

mini2002radio6

  • Both screws solve!

MiniS-Schrauben2

  • Under the drink mounting and in the middle section after the speed-shift they are also two screws must be solved with it one can remove the side plates of the central console.

 

MiniS-Schrauben3

  • One can remove the side strips afterwards! See photo below!

MiniS-Seitenteile600

  • After him remove of the side strips two screws will screw on right and left this beside the radio obviously. The radio lets itself afterwards forwards Rau’s drawing!

MiniS-Schrauben

  • In the back of the radio draw off the radioadaptor and the aerial plug.

40PinradioEN

 

  • In the BMW Mini radioshaft these both cables become obviously a connection with Mini with 40 PIN.

Steckerdetailbmw40EN

  • In the BMW Mini radioshaft these both cables become obviously a connection with Mini with 17 PIN.

17PINradio

Steckerdetailbmw17EN

  • The new radiovisor can be installed!

 

And already gehts off with the new radio!

Metal frames in the radiovisor push the frames bend
Radioadaptors and aerial adaptors stick on radio runs!

Aerial: In the BMW an aerial cable is Mini with Fakra connection in it in addition one needs a Fakra aerial adaptor.

Original is OEM-Radio built-in the BMW Mini, radiovisor allows the installation of aftermarket car radios and one can obstruct of every customary OEM-Radio.

A reasonable BMW should contain this Mini in 2001 – in 2007 radioinstallation set!

  •     Radiovisor
  •     Aerial adaptor Fakra
  •     BMW Mini radioadaptor

One can buy the adaptors also individually, however, this pays off most less than to order immediately a whole installation set, recommendable suppliers where one such sets agrees there is radiovisor of radio adapter.eu or car radio unites, for example, in BMW Mini installation set for BMW Mini from car radio adapter.eu. There comes of ale all at once and one specially needs to finish none parts around the installation.

 

6145040pinDINset

 

6145040pinISOset

 

6145017pinDINset

 

6145017pinISOset

BMW Mini One/Cooper Stereo Fitting Kit Facia, ISO Lead 17 PIN

BMW Mini 17 Pin fascia panel, radio installation kit

 

This  car stereo fitting kit is designed to fit the following vehicle(s);

  • BMW Mini 17 Pin 2001 – 2004  color black

These adaptors will allow you to remove your original factory headunit and replace it with an aftermarket unit.

The kit includes the following parts;

  • Fascia plate – converts dashboard to fit new stereo
  • ISO adaptor lead – converts wiring to common ISO type
  • Aerial adaptor – converts aerial connection

 

Radio dash kit: Facia Panels aid easy fitment and hold your new aftermarket unit securely within your dash and are designed to keep the factory fitted look of your vehicle.

 

ISO adaptor lead: The ISO harness allows you to convert the factory wiring to the ISO connector of the aftermarket headunit. Enabling it to be fitted without cutting any of the original wiring of the vehicle.

 

Aerial adaptor: Aerial adaptor may be required to complete the installation. Without the right aerial adapter you have a poor radio reception.

 

If you have purchased a new stereo then you will usually need these parts to fit it.

The parts are specifically designed to fit the vehicle(s) listed and make fitting the new stereo much easier.

BMW 3 Series E46 Fascia Facia Panel, Adapter Lead Fitting KIT

BMW E46 1998 – 2003 fascia panel + Aerial adaptor + ISO Harness Adaptors

 

This  car stereo fitting kit is designed to fit the following vehicle(s);

  • BMW E46 1998 – 2003  color black

These adaptors will allow you to remove your original factory headunit and replace it with an aftermarket unit.

The kit includes the following parts;

  • Fascia plate – converts dashboard to fit new stereo
  • ISO adaptor lead – converts wiring to common ISO type
  • Aerial adaptor – converts aerial connection

Radio dash kit: Facia Panels aid easy fitment and hold your new aftermarket unit securely within your dash and are designed to keep the factory fitted look of your vehicle.

 

ISO adaptor lead: The ISO harness allows you to convert the factory wiring to the ISO connector of the aftermarket headunit. Enabling it to be fitted without cutting any of the original wiring of the vehicle.

 

Aerial adaptor: Aerial adaptor may be required to complete the installation. Without the right aerial adapter you have a poor radio reception.

 

If you have purchased a new stereo then you will usually need these parts to fit it.

The parts are specifically designed to fit the vehicle(s) listed and make fitting the new stereo much easier.